> How to setup a PC Real Hi-T camera with Julie Quickvision ?

1. Make sure that the PCI 5+ card is properly installed.
2. it should appear as : "BT 848 Owandy WDM***** capture device" in the devices manager.
3. Make sure that OSP tools are properly installed
4. Launch Julie Quickvision
5. Go in the camera module
6. Do a right-click
7. Tick "digital camera"
8. In Source option, choose input : "0:Video Svideo In"
9. If the "properties" menu, cannot be accessed after having clicked on "Source", you need to install "DirectX 9.00.", which you will find in the OSP CR-ROM in the following directory : \setups\OEM\DirectX\DirectX9
10. If a green-bar appears on the left-side of the screen, go in "Display" and click OK to make it disappear.
11. Close Julie Quickvision
12. Re-launch Julie Quickvision