> How may I check that my DSX USB 3 sensor is properly installed ?

If you are running Windows 98se or Me :

1. Do a right-click on "Workstation"
2. click on "Properties"
3. Select the "Devices manager" tab
4. In the USB bus controllers section, the following line should be displayed :

DSX 730 USB 3

When selecting drivers file details, the following should be listed :

ow_usb.inf
vmm32.vxd
ezusb.sys

PLEASE NOTE THAT OSP TOOLS SHOULD BE INSTALLED TO MAKE THE SENSOR RUN PROPERLY

If you are running Windows 2000 or XP :

1. Do a right-click on "Workstation"
2. Click on "Manage"
3. In the USB bus controllers section, the following line should be displayed :

DSX 730 USB 3

When selecting drivers file details, the following should be listed :

ow_usb.inf
ezusb.sys

PLEASE NOTE THAT OSP TOOLS SHOULD BE INSTALLED TO MAKE THE SENSOR RUN PROPERLY