> How to setup an external camera with Julie Quickvision ?

If the imaging station is running Windows 98se or Me

1. Launch Julie application
2. go in camera module
3. do a right-click in the camera window and choose one of the following options depending on your input type :
a. if the input is S-Video : S-Video source or Digicam
b. if the imput is RCA video : composite
4. Choose you video standard : NTFC or PAL. Click OK
5. Click on "full" and choose "32 bits" in the "Format" menu, then click OK
6. Make sure that "digital camera" is un-ticked
7. Close Julie Quickvision
8. Re-launch Julie Quickvision

If the imaging station is running Windows XP or 2000

1. Launch Julie
2. go in camera module
3. do a right-click in the camera window and choose in the "Source" menu, one of the following options depending on your input type :
a. if the input is S-Video : 0 Video Svideo In
b. if the imput is RCA video : 4 Video Composite In
4. Make sure that "digital camera" is un-ticked
5. Close Julie Quickvision
6. Re-launch Julie Quickvision